Control

SINGLE POLE HIGH PRESSURE CONTROL, CLOSE HIGH OPEN LOW, 100 PSI TO 400 PSI, SPST, 35 PSI TO 200 PSI DIFFERENTIAL, 36" CAPILLARY WITH 1/4" FLARE NUT PRESSURE CONNECTOR, 475 PSIG MAXIMUM OVERPRESSURE, HEAD PRESSURE FAN CYCLING FOR R-12, R-22, R-134A, R-500 AND R-502 100/400# 36"CAP.SPST OPEN-LOW

9012G, pressure switch 9012 g, fixed scale, 1 threshold, 5.0 to 250 PSIG

AC Fan, 230V, 150x55mm, Round, 223.6CFM, 39W, 53dBA, Wire Leads

BCC M458-0000-2A-RM015-005 Receptacle

Auxiliary contact

AUXILIARY CONTACT MODULE - 1 N/O + 1 N/C

Relay, DC Control; 10A; 3-NO 1-NC; 24V DC Coil

WORLD-BEAM QS30 Series: Laser Diffuse (Class 1), Range: 400mm; Input: 10-30V dc, Output: Bipolar: 1 NPN; 1 PNP, Euro-Style Quick-Disconnect Connector

TESYS NEMA SZ00 REV.CONTACTOR 3 POLE 120

TESYS NEMA SZ1 CONTACTOR 3 POLE 120 VAC

OVERLOAD RELAY 9-13 ring terminals

LIGHT TERMINAL BLOCK ELD, GREEN, 24V AC/DC

LIGHT TERMINAL BLOCK ELD, RED, 24V AC/DC

Yellow label for Emergency Stop button

Hall effect switch (PNP, open), 3 meter leads

Hall effect switch (PNP, closed), 3 meter leads

Common Mode Chokes Dual 6.8mH 10kHz 2A 0.156Ohm DCR Thru-Hole

Contact Block, 22.5mm, Plastic, 1 Normally Closed

Terminal block, 2 x 4-1/0MCM, 2 x 25-50 mm², For use with: S801+, S811+, frame sizes T and U

Key switch selector flush mounted, plastic, black, Ø30, key n°455, 2 positions, spring return, 1 NO

CS5.241 5Amp 24-28VDC 120W Puls Switch Mode DIN Rail Panel Mount Power Supply

Metal Safety Limit Switch SLK-F-UC-55-R1-A0-L0-0 A; 2 NC contacts

Replacement actuating key for safety switch SLK, SLM, ENK-VTU, ENM2-VTW

PMMA acrylic tube, 150 cm

Safety light guard, Type 4, PL e hand protection (resolution 30 mm), protected field height 1500 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5-pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

Safety light guard, Type 4, PL e, hand protection (resolution 30 mm), protected field height 1500 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied

Spare key for AUTO-OFF/RESET-HAND switch

Fork light barrier OGU with LED

Angled light barrier OGL with LED

Inductive sensor IFB3004BAPKG/M/V4A/US-104-DPO

Power supply with 340-575 VAC or 480-820 VDC input voltage and 24 VDC at 10 amp rated output

3 pole, 25 amp, non-reversing across the line contactor with 24-60V AC and 20-60V DC coil and 1 NO contacts

3 pole, 6.3 to 10.0 amps, UL rated, MS132 manual motor protector

3 pole, 1.6 to 2.5 amps, UL rated, MS132 manual motor protector

3 pole, 4.0 to 6.3 amp, UL rated, MS132 manual motor protector

3 pole,10.0 to 16.0 amps, UL rated, MS132 manual motor protector