Sensor/detection principle Photoelectric proximity sensor, Background suppression
Dimensions (W x H x D) 12.2 mm x 52.2 mm x 23.6 mm
Housing design (light emission) Rectangular
Mounting hole M3
Sensing range max. 20 mm ... 350 mm 1)
Sensing range 20 mm ... 200 mm 2)
Type of light Visible red light
Light source PinPoint LED 3)
Light spot size (distance) Ø 4.5 mm (75 mm)
Wave length 650 nm
Adjustment Potentiometer, 5 turns
General Purpose Diode
•Peak Repet. Reverse Voltage (Vrrm): 1000V
•Max. RMS Reverse Voltage (Vr): 700V
•Average Rectified Current (Io): 1.5A
•Max. Reverse Current (Ir): 0.005mA
•Max. Forward Voltage Drop (Vf): 1.0V
INDUCTIVE SENSOR PNP NORMALLY CLOSED (NC) 16.00 MM NON EMBEDDABLE CABLE, PVC, 2.00 M CONNECTION TYPE CABLE EFF. OPERATING CURRENT IE 200 MA EFF. OPERATING VOLTAGE UE DC 24.0 V ELECTRICAL VERSION DC, DIRECT CURRENT LOAD CAPACITANCE MAX. (AT UE) 0.500 µF
GF PIPING SYSTEMS 3-2536-P0 ROTOR-X LOW-FLOW PADDLE-WHEEL FLOW SENSORS. MEASURE LOW FLOW RATES DOWN TO 0.3 FT/SECOND MEASURE LOW FLOW RATES IN ALMOST ANY SIZE PIPE. THESE SENSORS CONTAIN AN OPEN-CORE ROTOR WITH A SMALL MAGNET IN EACH OF THE FOUR BLADES. AS THEY ROTATE, THE MAGNETS PASS A HALL EFFECT SENSOR, WHICH GENERATES A LINEAR FREQUENCY OUTPUT THAT IS PROPORTIONAL TO THE FLOW VELOCITY. THIS SIGNAL TRAVELS UP TO 1000 FEET WITHOUT AMPLIFICATION. THE OPEN-CORE DESIGN ELIMINATES CAVITATION AT FLOW VELOCITIES FROM 0.3 TO 20 FT/SECOND. CLOSED OR SOLID PADDLE-WHEEL DESIGNS CREATE AIR BUBBLES AT THESE VELOCITIES, CAUSING A NONLINEAR AND NONREPEATABLE SIGNAL. SENSOR MATERIALS RESIST MOST CHEMICALS. ALL MODELS HAVE PVDF ROTOR AND VITON® O-RING; AND INCLUDE A 25-FT CONNECTING CABLE. ROTOR-X LOW-FLOW SENSORS ARE COMPATIBLE WITH ALL OF OUR LINE-POWERED FLOW INDICATORS, ACCUMULATORS, AND CONTROLLERS. MOUNT IN ANY TYPE OF PIPE. ORDER INSTALLATION FITTINGS SEPARATELY. MAX OPERATING TEMPERATURE(º F) 185,MAX OPERATING TEMPERATURE(º C) 85,PRODUCT TYPE FLOW SENSOR. GF SIGNET 2536 ROTOR-X FLOW SENSOR, PP/TI/PVDF FOR 0.5-4" PIPE.
The Model FT2A has a large selection of communication protocol options available intrinsically (without any other equipment). Options include: BACnet MS/TP, RS485 Modbus RTU, Profibus-DP, DeviceNet, or Ethernet Modbus TCP.
The Model FT2A measures gas flow rate in standard units (SCFM, NM³/hr, LBS/HR, KG/HR & many more) without the need for temperature and pressure compensation. See the Features/Benefits section below to explore all that the FT2A can offer your application