Control Products

LIGHT TERMINAL BLOCK ELD, GREEN, 24V AC/DC

LIGHT TERMINAL BLOCK ELD, RED, 24V AC/DC

Yellow label for Emergency Stop button

Hall effect switch (PNP, closed), 3 meter leads

Common Mode Chokes Dual 6.8mH 10kHz 2A 0.156Ohm DCR Thru-Hole

Contact Block, 22.5mm, Plastic, 1 Normally Closed

Key switch selector flush mounted, plastic, black, Ø30, key n°455, 2 positions, spring return, 1 NO

CS5.241 5Amp 24-28VDC 120W Puls Switch Mode DIN Rail Panel Mount Power Supply

Metal Safety Limit Switch SLK-F-UC-55-R1-A0-L0-0 A; 2 NC contacts

Replacement actuating key for safety switch SLK, SLM, ENK-VTU, ENM2-VTW

PMMA acrylic tube, 150 cm

Safety light guard, Type 4, PL e hand protection (resolution 30 mm), protected field height 1500 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5-pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

Safety light guard, Type 4, PL e, hand protection (resolution 30 mm), protected field height 1500 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied

Spare key for AUTO-OFF/RESET-HAND switch

Fork light barrier OGU with LED

Angled light barrier OGL with LED

Inductive sensor IFB3004BAPKG/M/V4A/US-104-DPO

Power supply with 340-575 VAC or 480-820 VDC input voltage and 24 VDC at 10 amp rated output

3 pole, 25 amp, non-reversing across the line contactor with 24-60V AC and 20-60V DC coil and 1 NO contacts

MS116/132 INFEED BLOCK, FLAT, 4AWG

Right side mounted auxiliary contact for S200U, S200UP, SU200PR, and S200UDC miniature circuit breakers

MS116/132 SIGNAL. CONT. 1NO-1NC, SIDE

Socket for 3PDT and module for Plugin control relay

Power supply with 90-132 VAC or 180-264 VAC or 210-375 VDC input voltage and 24 VDC at 5 amp rated output

Plugin control relay with 24 VDC rated control supply voltage, SPDT (2 c/o) contacts, contacts, without LED indicator and 250 V, 12 A contact rating

Logical socket for DPDT (2 c/o) Plugin control relays with screw type connection terminal

3 pole electronic overload relay with 1.90-6.30 amp setting range

8221 Slow Closing Solenoid Valve, 1-1/4" x 1-1/4", FPT x FPT, 24 VDC, "L" option 72" leads

M18 Series EZ-LIGHT: 1-Color General Purpose Indic Voltage: 10-30V dc; Housing: Nickel-plated brass; Input: PNP; Colors: White

PCB/Plug-in relay, 2 Pole, 24Vac

SOCKET WITH SCREW (BOX CLAMP) TERMINALS

COIL INDICATION AND EMC SUPPRESSION MODULE

Line Reactor 600V_1.6A_3PH_5%

Power Relay 12VDC 10A DPDT(35.7x35.7x50.8)mm Socket

Rotary Switches 01-1-07N

15/16 in. Instrument Knob